Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut
and ball nose, as well as coated or non coated.
This is a long series endmill.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 16.0mm
$155.65 NZD
Approx $93.33 USD Excl GST Product Code: 369 1600
- Diameter: 16.0
- Shank Diameter: 16
- Length: 100
- Flute Length: 40
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 16.0mm
$129.00 NZD
Approx $77.35 USD Excl GST Product Code: 368 1600
- Diameter: 16.0
- Shank Diameter: 16
- Length: 100
- Flute Length: 40
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 14.0mm
$115.50 NZD
Approx $69.25 USD Excl GST Product Code: 369 1400
- Diameter: 14.0
- Shank Diameter: 14
- Length: 80
- Flute Length: 35
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 12.0mm
$89.00 NZD
Approx $53.37 USD Excl GST Product Code: 368 1200
- Diameter: 12.0
- Shank Diameter: 12
- Length: 75
- Flute Length: 30
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 12.0mm
$86.09 NZD
Approx $51.62 USD Excl GST Product Code: 369 1200
- Diameter: 12.0
- Shank Diameter: 12
- Length: 75
- Flute Length: 30
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product