Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut
and ball nose, as well as coated or non coated.
This is a long series endmill.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 16.0mm
$155.65 NZD
Approx $92.12 USD Excl GST Product Code: 369 1600
- Diameter: 16.0
- Shank Diameter: 16
- Length: 100
- Flute Length: 40
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 14.0mm
$115.50 NZD
Approx $68.35 USD Excl GST Product Code: 369 1400
- Diameter: 14.0
- Shank Diameter: 14
- Length: 80
- Flute Length: 35
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 12.0mm
$86.09 NZD
Approx $50.95 USD Excl GST Product Code: 369 1200
- Diameter: 12.0
- Shank Diameter: 12
- Length: 75
- Flute Length: 30
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 10.0mm
$81.74 NZD
Approx $48.38 USD Excl GST Product Code: 369 1000
- Diameter: 10.0
- Shank Diameter: 10
- Length: 75
- Flute Length: 25
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 8.0mm
$77.39 NZD
Approx $45.80 USD Excl GST Product Code: 369 0800
- Diameter: 8.0
- Shank Diameter: 8
- Length: 60
- Flute Length: 20
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 7.0mm
$68.70 NZD
Approx $40.66 USD Excl GST Product Code: 369 0700
- Diameter: 7.0
- Shank Diameter: 8
- Length: 60
- Flute Length: 17
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 6.0mm
$60.00 NZD
Approx $35.51 USD Excl GST Product Code: 369 0600
- Diameter: 6.0
- Shank Diameter: 6
- Length: 50
- Flute Length: 15
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 5.5mm
$51.30 NZD
Approx $30.36 USD Excl GST Product Code: 369 0550
- Diameter: 5.5
- Shank Diameter: 6
- Length: 50
- Flute Length: 14
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 2mm
$42.61 NZD
Approx $25.22 USD Excl GST Product Code: 369 0200
- Diameter: 2
- Shank Diameter: 4
- Length: 50
- Flute Length: 5
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 3.5mm
$42.61 NZD
Approx $25.22 USD Excl GST Product Code: 369 0350
- Diameter: 3.5
- Shank Diameter: 4
- Length: 50
- Flute Length: 9
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 3mm
$42.61 NZD
Approx $25.22 USD Excl GST Product Code: 369 0300
- Diameter: 3
- Shank Diameter: 4
- Length: 50
- Flute Length: 8
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 4.0mm
$42.61 NZD
Approx $25.22 USD Excl GST Product Code: 369 0400
- Diameter: 4.0
- Shank Diameter: 4
- Length: 50
- Flute Length: 10
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 5.0mm
$42.61 NZD
Approx $25.22 USD Excl GST Product Code: 369 0500
- Diameter: 5.0
- Shank Diameter: 6
- Length: 50
- Flute Length: 13
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
