Drill Bits

HomeProductsCategoriesDrill-bits

If you're needing to drill holes, look no further. North Shore Tooling Supplies has a great range of drill bits depending on what job you're needing to complete. Manufactured from High Speed Steel through to Cobalt for those tougher jobs, we have the products you need.

Standard Jobber Drills, Taper Shank, Reduced Shank, Centre and Panel Drills are just some of the more common drill types we stock. Browse our range for more.


Sub Categories

Search Products Search Products

Taper Shank Drills Imperial | 2"

Taper Shank Drills Imperial | 2"

$255.74 NZD
Approx $153.35 USD
Excl GST Product Code: 262 5200

  • Diameter: 2"
  • Length: 17 + 3/8"
  • Flute Length: 10 + 1/4"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 50mm

Taper Shank Drills Metric | 50mm

$255.74 NZD
Approx $153.35 USD
Excl GST Product Code: 260 5000

  • Diameter: 50
  • Length: 369
  • Flute Length: 220
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 49mm

Taper Shank Drills Metric | 49mm

$245.05 NZD
Approx $146.94 USD
Excl GST Product Code: 260 4900

  • Diameter: 49
  • Length: 369
  • Flute Length: 220
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Imperial | 1+15/16"

Taper Shank Drills Imperial | 1+15/16"

$238.20 NZD
Approx $142.83 USD
Excl GST Product Code: 262 4160

  • Diameter: 1 + 15/16"
  • Length: 17 + 3/8"
  • Flute Length: 10 + 1/4"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 48mm

Taper Shank Drills Metric | 48mm

$238.08 NZD
Approx $142.76 USD
Excl GST Product Code: 260 4800

  • Diameter: 48
  • Length: 369
  • Flute Length: 220
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Imperial | 1+7/8"

Taper Shank Drills Imperial | 1+7/8"

$232.20 NZD
Approx $139.23 USD
Excl GST Product Code: 262 4156

  • Diameter: 1 + 7/8"
  • Length: 17 + 3/8"
  • Flute Length: 10 + 1/4"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 46mm

Taper Shank Drills Metric | 46mm

$223.42 NZD
Approx $133.97 USD
Excl GST Product Code: 260 4600

  • Diameter: 46
  • Length: 364
  • Flute Length: 215
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

SDS Plus - Masonry 4 Flute | 30mm

SDS Plus - Masonry 4 Flute | 30mm

$210.75 NZD
Approx $126.37 USD
Excl GST Product Code: SPZ300250

  • Diameter: 30
  • Length: 250
  • Flute Length: 200

Description:

The Alpha ZENTRO Masonry range boasts dynamic drilling ability with secondary cutters protecting the drill bit in the event of reinforcement collision. The one-piece, solid carbide tip and patented reinforcing chamfering ensure low vibration and optimum drilling performance when drilling into reinforcing steel. Thanks to optimum 4 x 90ï¾° symmetry, all four carbide cutting edges function evenly and do not seize up on hitting reinforcing steel. Lateral support and maximum possible area of the interface between the carbide and steel body compensate for torsional forces. Centering tip for straight forward spot drilling with pinpoint accuracy. Four symmetrically functioning spiral ridges ensure low, uniform flute wear. Optimised flute core strength ensures low vibration drilling performance and exceptional fracture resistance. The high-volume flute geometry ensures the optimum removal of drilling dust|4 Cutter head prevents seizing when drilling through reinforcing steel. Penetrates through steel deck plate e.g. Bondekï¾® and concrete in one easy process

Enquire about this product

Taper Shank Drills Imperial | 1+13/16"

Taper Shank Drills Imperial | 1+13/16"

$207.11 NZD
Approx $124.19 USD
Excl GST Product Code: 262 4152

  • Diameter: 1 + 13/16"
  • Length: 17 + 3/8"
  • Flute Length: 10 + 1/8"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 45mm

Taper Shank Drills Metric | 45mm

$207.11 NZD
Approx $124.19 USD
Excl GST Product Code: 260 4500

  • Diameter: 45
  • Length: 359
  • Flute Length: 210
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

HSS Drill Set 6-10mm 41pc

HSS Drill Set 6-10mm 41pc

$195.61 NZD
Approx $117.29 USD
Excl GST Product Code:

Description:

High Speed Steel
41 pieces
0.1mm increments

Enquire about this product

Taper Shank Drills Metric | 44mm

Taper Shank Drills Metric | 44mm

$188.16 NZD
Approx $112.83 USD
Excl GST Product Code: 260 4400

  • Diameter: 44
  • Length: 359
  • Flute Length: 210
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

SDS Plus - Masonry 4 Flute | 28mm

SDS Plus - Masonry 4 Flute | 28mm

$187.75 NZD
Approx $112.58 USD
Excl GST Product Code: SPZ280250

  • Diameter: 28
  • Length: 250
  • Flute Length: 200

Description:

The Alpha ZENTRO Masonry range boasts dynamic drilling ability with secondary cutters protecting the drill bit in the event of reinforcement collision. The one-piece, solid carbide tip and patented reinforcing chamfering ensure low vibration and optimum drilling performance when drilling into reinforcing steel. Thanks to optimum 4 x 90ï¾° symmetry, all four carbide cutting edges function evenly and do not seize up on hitting reinforcing steel. Lateral support and maximum possible area of the interface between the carbide and steel body compensate for torsional forces. Centering tip for straight forward spot drilling with pinpoint accuracy. Four symmetrically functioning spiral ridges ensure low, uniform flute wear. Optimised flute core strength ensures low vibration drilling performance and exceptional fracture resistance. The high-volume flute geometry ensures the optimum removal of drilling dust|4 Cutter head prevents seizing when drilling through reinforcing steel. Penetrates through steel deck plate e.g. Bondekï¾® and concrete in one easy process

Enquire about this product

Taper Shank Drills Imperial | 1+3/4"

Taper Shank Drills Imperial | 1+3/4"

$180.96 NZD
Approx $108.51 USD
Excl GST Product Code: 262 4148

  • Diameter: 1 + 3/4"
  • Length: 17 + 1/8"
  • Flute Length: 10 + 1/8"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 43mm

Taper Shank Drills Metric | 43mm

$174.42 NZD
Approx $104.59 USD
Excl GST Product Code: 260 4300

  • Diameter: 43
  • Length: 359
  • Flute Length: 210
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Imperial | 1+11/16"

Taper Shank Drills Imperial | 1+11/16"

$169.51 NZD
Approx $101.64 USD
Excl GST Product Code: 262 4144

  • Diameter: 1 + 11/16"
  • Length: 17 + 1/8"
  • Flute Length: 10 + 1/8"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 42mm

Taper Shank Drills Metric | 42mm

$169.51 NZD
Approx $101.64 USD
Excl GST Product Code: 260 4200

  • Diameter: 42
  • Length: 354
  • Flute Length: 205
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

SDS Plus - Masonry 4 Flute | 25mm

SDS Plus - Masonry 4 Flute | 25mm

$167.75 NZD
Approx $100.59 USD
Excl GST Product Code: SPZ250250

  • Diameter: 25
  • Length: 250
  • Flute Length: 200

Description:

The Alpha ZENTRO Masonry range boasts dynamic drilling ability with secondary cutters protecting the drill bit in the event of reinforcement collision. The one-piece, solid carbide tip and patented reinforcing chamfering ensure low vibration and optimum drilling performance when drilling into reinforcing steel. Thanks to optimum 4 x 90ï¾° symmetry, all four carbide cutting edges function evenly and do not seize up on hitting reinforcing steel. Lateral support and maximum possible area of the interface between the carbide and steel body compensate for torsional forces. Centering tip for straight forward spot drilling with pinpoint accuracy. Four symmetrically functioning spiral ridges ensure low, uniform flute wear. Optimised flute core strength ensures low vibration drilling performance and exceptional fracture resistance. The high-volume flute geometry ensures the optimum removal of drilling dust|4 Cutter head prevents seizing when drilling through reinforcing steel. Penetrates through steel deck plate e.g. Bondekï¾® and concrete in one easy process

Enquire about this product

Taper Shank Drills Metric | 40mm

Taper Shank Drills Metric | 40mm

$165.28 NZD
Approx $99.11 USD
Excl GST Product Code: 260 4000

  • Diameter: 40
  • Length: 349
  • Flute Length: 200
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Imperial | 1+5/8"

Taper Shank Drills Imperial | 1+5/8"

$164.40 NZD
Approx $98.58 USD
Excl GST Product Code: 262 4140

  • Diameter: 1 + 5/8"
  • Length: 17"
  • Flute Length: 10"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 39.5mm

Taper Shank Drills Metric | 39.5mm

$164.40 NZD
Approx $98.58 USD
Excl GST Product Code: 260 3950

  • Diameter: 39.5
  • Length: 349
  • Flute Length: 200
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Imperial | 1+9/16"

Taper Shank Drills Imperial | 1+9/16"

$161.99 NZD
Approx $97.13 USD
Excl GST Product Code: 262 4136

  • Diameter: 1 + 9/16"
  • Length: 16 + 5/8"
  • Flute Length: 9 + 5/8"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 39mm

Taper Shank Drills Metric | 39mm

$161.99 NZD
Approx $97.13 USD
Excl GST Product Code: 260 3900

  • Diameter: 39
  • Length: 349
  • Flute Length: 200
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 38.5mm

Taper Shank Drills Metric | 38.5mm

$159.04 NZD
Approx $95.37 USD
Excl GST Product Code: 260 3850

  • Diameter: 38.5
  • Length: 349
  • Flute Length: 200
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 38mm

Taper Shank Drills Metric | 38mm

$155.19 NZD
Approx $93.06 USD
Excl GST Product Code: 260 3800

  • Diameter: 38
  • Length: 349
  • Flute Length: 200
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Conical Drills | 36MM - 50MM

Conical Drills | 36MM - 50MM

$153.09 NZD
Approx $91.80 USD
Excl GST Product Code: 282 0006

  • Hole Sizes: 36MM - 50MM

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

SDS Plus - Masonry 2 Flute | 23mm

SDS Plus - Masonry 2 Flute | 23mm

$151.75 NZD
Approx $90.99 USD
Excl GST Product Code: SP230450G

  • Diameter: 23
  • Length: 450
  • Flute Length: 400

Description:

Alpha SDS+ Masonry Drills 2 Head Cut • The dynamic chisel-shaped and centring tip provides optimal guidance while drilling • Tungsten carbide tipped for longevity • Strengthened flute • Centering chisel head with multi-flute spiral for maximum drilling capacity • Easy centring spot drilling • Dynamic, chisel-shaped head design • Fully certified for drilling anchor holes Suits: SDS rotary hammer drills Ideal for: All masonry applications including concrete with rebar

Enquire about this product

Taper Shank Drills Metric | 37.5mm

Taper Shank Drills Metric | 37.5mm

$150.15 NZD
Approx $90.03 USD
Excl GST Product Code: 260 3750

  • Diameter: 37.5
  • Length: 344
  • Flute Length: 195
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

SDS Plus - Masonry 4 Flute | 24mm

SDS Plus - Masonry 4 Flute | 24mm

$149.75 NZD
Approx $89.79 USD
Excl GST Product Code: SPZ240250

  • Diameter: 24
  • Length: 250
  • Flute Length: 200

Description:

The Alpha ZENTRO Masonry range boasts dynamic drilling ability with secondary cutters protecting the drill bit in the event of reinforcement collision. The one-piece, solid carbide tip and patented reinforcing chamfering ensure low vibration and optimum drilling performance when drilling into reinforcing steel. Thanks to optimum 4 x 90ï¾° symmetry, all four carbide cutting edges function evenly and do not seize up on hitting reinforcing steel. Lateral support and maximum possible area of the interface between the carbide and steel body compensate for torsional forces. Centering tip for straight forward spot drilling with pinpoint accuracy. Four symmetrically functioning spiral ridges ensure low, uniform flute wear. Optimised flute core strength ensures low vibration drilling performance and exceptional fracture resistance. The high-volume flute geometry ensures the optimum removal of drilling dust|4 Cutter head prevents seizing when drilling through reinforcing steel. Penetrates through steel deck plate e.g. Bondekï¾® and concrete in one easy process

Enquire about this product

Taper Shank Drills Imperial | 1+1/2"

Taper Shank Drills Imperial | 1+1/2"

$147.39 NZD
Approx $88.38 USD
Excl GST Product Code: 262 4132

  • Diameter: 1 + 1/2"
  • Length: 15"
  • Flute Length: 9 + 3/8"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 37mm

Taper Shank Drills Metric | 37mm

$147.39 NZD
Approx $88.38 USD
Excl GST Product Code: 260 3700

  • Diameter: 37
  • Length: 344
  • Flute Length: 195
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

SDS Plus - Masonry 4 Flute | 22mm

SDS Plus - Masonry 4 Flute | 22mm

$139.75 NZD
Approx $83.80 USD
Excl GST Product Code: SPZ220250

  • Diameter: 22
  • Length: 250
  • Flute Length: 200

Description:

The Alpha ZENTRO Masonry range boasts dynamic drilling ability with secondary cutters protecting the drill bit in the event of reinforcement collision. The one-piece, solid carbide tip and patented reinforcing chamfering ensure low vibration and optimum drilling performance when drilling into reinforcing steel. Thanks to optimum 4 x 90ï¾° symmetry, all four carbide cutting edges function evenly and do not seize up on hitting reinforcing steel. Lateral support and maximum possible area of the interface between the carbide and steel body compensate for torsional forces. Centering tip for straight forward spot drilling with pinpoint accuracy. Four symmetrically functioning spiral ridges ensure low, uniform flute wear. Optimised flute core strength ensures low vibration drilling performance and exceptional fracture resistance. The high-volume flute geometry ensures the optimum removal of drilling dust|4 Cutter head prevents seizing when drilling through reinforcing steel. Penetrates through steel deck plate e.g. Bondekï¾® and concrete in one easy process

Enquire about this product

SDS Plus - Masonry 2 Flute | 26mm

SDS Plus - Masonry 2 Flute | 26mm

$131.75 NZD
Approx $79.00 USD
Excl GST Product Code: SP260250G

  • Diameter: 26
  • Length: 250
  • Flute Length: 200

Description:

Alpha SDS+ Masonry Drills 2 Head Cut • The dynamic chisel-shaped and centring tip provides optimal guidance while drilling • Tungsten carbide tipped for longevity • Strengthened flute • Centering chisel head with multi-flute spiral for maximum drilling capacity • Easy centring spot drilling • Dynamic, chisel-shaped head design • Fully certified for drilling anchor holes Suits: SDS rotary hammer drills Ideal for: All masonry applications including concrete with rebar

Enquire about this product

Cobalt Drill Set 1-13mm 25pc

Cobalt Drill Set 1-13mm 25pc

$131.02 NZD
Approx $78.56 USD
Excl GST Product Code:

Description:

M35 Cobalt 5%
25 pieces
0.5mm increments

Enquire about this product

Taper Shank Drills Imperial | 1+7/16"

Taper Shank Drills Imperial | 1+7/16"

$127.54 NZD
Approx $76.48 USD
Excl GST Product Code: 262 4128

  • Diameter: 1 + 7/16"
  • Length: 14 + 3/4"
  • Flute Length: 9 + 1/8"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 36.5mm

Taper Shank Drills Metric | 36.5mm

$127.54 NZD
Approx $76.48 USD
Excl GST Product Code: 260 3650

  • Diameter: 36.5
  • Length: 344
  • Flute Length: 195
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

SDS Plus - Masonry 2 Flute | 25mm

SDS Plus - Masonry 2 Flute | 25mm

$121.75 NZD
Approx $73.00 USD
Excl GST Product Code: SP250250G

  • Diameter: 25
  • Length: 250
  • Flute Length: 200

Description:

Alpha SDS+ Masonry Drills 2 Head Cut • The dynamic chisel-shaped and centring tip provides optimal guidance while drilling • Tungsten carbide tipped for longevity • Strengthened flute • Centering chisel head with multi-flute spiral for maximum drilling capacity • Easy centring spot drilling • Dynamic, chisel-shaped head design • Fully certified for drilling anchor holes Suits: SDS rotary hammer drills Ideal for: All masonry applications including concrete with rebar

Enquire about this product

Taper Shank Drills Metric | 36mm

Taper Shank Drills Metric | 36mm

$119.40 NZD
Approx $71.60 USD
Excl GST Product Code: 260 3600

  • Diameter: 36
  • Length: 344
  • Flute Length: 195
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 35.5mm

Taper Shank Drills Metric | 35.5mm

$117.72 NZD
Approx $70.59 USD
Excl GST Product Code: 260 3550

  • Diameter: 35.5
  • Length: 339
  • Flute Length: 190
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Conical Drills | 26MM - 40MM

Conical Drills | 26MM - 40MM

$115.50 NZD
Approx $69.26 USD
Excl GST Product Code: 282 0005

  • Hole Sizes: 26MM - 40MM

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

SDS Plus - Masonry 2 Flute | 24mm

SDS Plus - Masonry 2 Flute | 24mm

$110.75 NZD
Approx $66.41 USD
Excl GST Product Code: SP240250G

  • Diameter: 24
  • Length: 250
  • Flute Length: 200

Description:

Alpha SDS+ Masonry Drills 2 Head Cut • The dynamic chisel-shaped and centring tip provides optimal guidance while drilling • Tungsten carbide tipped for longevity • Strengthened flute • Centering chisel head with multi-flute spiral for maximum drilling capacity • Easy centring spot drilling • Dynamic, chisel-shaped head design • Fully certified for drilling anchor holes Suits: SDS rotary hammer drills Ideal for: All masonry applications including concrete with rebar

Enquire about this product

Taper Shank Drills Imperial | 1+3/8"

Taper Shank Drills Imperial | 1+3/8"

$110.51 NZD
Approx $66.27 USD
Excl GST Product Code: 262 4124

  • Diameter: 1 + 3/8"
  • Length: 14 + 1/2"
  • Flute Length: 8 + 7/8"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

SDS Plus - Masonry 4 Flute | 18mm

SDS Plus - Masonry 4 Flute | 18mm

$108.75 NZD
Approx $65.21 USD
Excl GST Product Code: SPZ180250

  • Diameter: 18
  • Length: 250
  • Flute Length: 200

Description:

The Alpha ZENTRO Masonry range boasts dynamic drilling ability with secondary cutters protecting the drill bit in the event of reinforcement collision. The one-piece, solid carbide tip and patented reinforcing chamfering ensure low vibration and optimum drilling performance when drilling into reinforcing steel. Thanks to optimum 4 x 90ï¾° symmetry, all four carbide cutting edges function evenly and do not seize up on hitting reinforcing steel. Lateral support and maximum possible area of the interface between the carbide and steel body compensate for torsional forces. Centering tip for straight forward spot drilling with pinpoint accuracy. Four symmetrically functioning spiral ridges ensure low, uniform flute wear. Optimised flute core strength ensures low vibration drilling performance and exceptional fracture resistance. The high-volume flute geometry ensures the optimum removal of drilling dust|4 Cutter head prevents seizing when drilling through reinforcing steel. Penetrates through steel deck plate e.g. Bondekï¾® and concrete in one easy process

Enquire about this product

SDS Plus - Masonry 4 Flute | 20mm

SDS Plus - Masonry 4 Flute | 20mm

$108.75 NZD
Approx $65.21 USD
Excl GST Product Code: SPZ200250

  • Diameter: 20
  • Length: 250
  • Flute Length: 200

Description:

The Alpha ZENTRO Masonry range boasts dynamic drilling ability with secondary cutters protecting the drill bit in the event of reinforcement collision. The one-piece, solid carbide tip and patented reinforcing chamfering ensure low vibration and optimum drilling performance when drilling into reinforcing steel. Thanks to optimum 4 x 90ï¾° symmetry, all four carbide cutting edges function evenly and do not seize up on hitting reinforcing steel. Lateral support and maximum possible area of the interface between the carbide and steel body compensate for torsional forces. Centering tip for straight forward spot drilling with pinpoint accuracy. Four symmetrically functioning spiral ridges ensure low, uniform flute wear. Optimised flute core strength ensures low vibration drilling performance and exceptional fracture resistance. The high-volume flute geometry ensures the optimum removal of drilling dust|4 Cutter head prevents seizing when drilling through reinforcing steel. Penetrates through steel deck plate e.g. Bondekï¾® and concrete in one easy process

Enquire about this product

Taper Shank Drills Metric | 35mm

Taper Shank Drills Metric | 35mm

$107.36 NZD
Approx $64.38 USD
Excl GST Product Code: 260 3500

  • Diameter: 35
  • Length: 339
  • Flute Length: 190
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Imperial | 1+5/16"

Taper Shank Drills Imperial | 1+5/16"

$105.70 NZD
Approx $63.38 USD
Excl GST Product Code: 262 4120

  • Diameter: 1 + 5/16"
  • Length: 14 + 1/4"
  • Flute Length: 8 + 5/8"
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 34.5mm

Taper Shank Drills Metric | 34.5mm

$105.22 NZD
Approx $63.09 USD
Excl GST Product Code: 260 3450

  • Diameter: 34.5
  • Length: 339
  • Flute Length: 190
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 34mm

Taper Shank Drills Metric | 34mm

$104.22 NZD
Approx $62.49 USD
Excl GST Product Code: 260 3400

  • Diameter: 34
  • Length: 339
  • Flute Length: 190
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Imperial | 1+1/4"

Taper Shank Drills Imperial | 1+1/4"

$103.91 NZD
Approx $62.31 USD
Excl GST Product Code: 262 3116

  • Diameter: 1 + 1/4"
  • Length: 13 + 1/2"
  • Flute Length: 7 + 7/8"
  • Morse Taper: 3MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 33.5mm

Taper Shank Drills Metric | 33.5mm

$103.02 NZD
Approx $61.77 USD
Excl GST Product Code: 260 3350

  • Diameter: 33.5
  • Length: 334
  • Flute Length: 185
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 33mm

Taper Shank Drills Metric | 33mm

$99.82 NZD
Approx $59.85 USD
Excl GST Product Code: 260 3300

  • Diameter: 33
  • Length: 334
  • Flute Length: 185
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

SDS Plus - Masonry 4 Flute | 16mm

SDS Plus - Masonry 4 Flute | 16mm

$99.75 NZD
Approx $59.81 USD
Excl GST Product Code: SPZ160260

  • Diameter: 16
  • Length: 260
  • Flute Length: 200

Description:

The Alpha ZENTRO Masonry range boasts dynamic drilling ability with secondary cutters protecting the drill bit in the event of reinforcement collision. The one-piece, solid carbide tip and patented reinforcing chamfering ensure low vibration and optimum drilling performance when drilling into reinforcing steel. Thanks to optimum 4 x 90ï¾° symmetry, all four carbide cutting edges function evenly and do not seize up on hitting reinforcing steel. Lateral support and maximum possible area of the interface between the carbide and steel body compensate for torsional forces. Centering tip for straight forward spot drilling with pinpoint accuracy. Four symmetrically functioning spiral ridges ensure low, uniform flute wear. Optimised flute core strength ensures low vibration drilling performance and exceptional fracture resistance. The high-volume flute geometry ensures the optimum removal of drilling dust|4 Cutter head prevents seizing when drilling through reinforcing steel. Penetrates through steel deck plate e.g. Bondekï¾® and concrete in one easy process

Enquire about this product

Taper Shank Drills Metric | 32.5mm

Taper Shank Drills Metric | 32.5mm

$97.01 NZD
Approx $58.17 USD
Excl GST Product Code: 260 3250

  • Diameter: 32.5
  • Length: 334
  • Flute Length: 185
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 32mm

Taper Shank Drills Metric | 32mm

$93.74 NZD
Approx $56.21 USD
Excl GST Product Code: 260 3200

  • Diameter: 32
  • Length: 334
  • Flute Length: 185
  • Morse Taper: 4MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Jobber Metric Long Series | 15.5mm

Jobber Metric Long Series | 15.5mm

$89.90 NZD
Approx $53.91 USD
Excl GST Product Code: 204 1550

  • Diameter: 15.5
  • Length: 227
  • Flute Length: 149

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 31.5mm

Taper Shank Drills Metric | 31.5mm

$89.83 NZD
Approx $53.86 USD
Excl GST Product Code: 260 3150

  • Diameter: 31.5
  • Length: 301
  • Flute Length: 180
  • Morse Taper: 3MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

HSS Drill Set 1-5.9mm 50pc

HSS Drill Set 1-5.9mm 50pc

$87.31 NZD
Approx $52.36 USD
Excl GST Product Code:

Description:

High Speed Steel
50 pieces
0.1 increments.

Enquire about this product

Jobber Metric Long Series | 16mm

Jobber Metric Long Series | 16mm

$86.40 NZD
Approx $51.81 USD
Excl GST Product Code: 204 1600

  • Diameter: 16
  • Length: 227
  • Flute Length: 149

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

Taper Shank Drills Metric | 31mm

Taper Shank Drills Metric | 31mm

$86.23 NZD
Approx $51.71 USD
Excl GST Product Code: 260 3100

  • Diameter: 31
  • Length: 301
  • Flute Length: 180
  • Morse Taper: 3MT

Description:

Our range of drill bits, manufactured from high speed steel (HSS M2) through to cobalt (M35). Available in different diameter, length, flute length, and morse taper.

Enquire about this product

SDS Plus - Masonry 2 Flute | 22mm

SDS Plus - Masonry 2 Flute | 22mm

$81.75 NZD
Approx $49.02 USD
Excl GST Product Code: SP220250G

  • Diameter: 22
  • Length: 250
  • Flute Length: 200

Description:

Alpha SDS+ Masonry Drills 2 Head Cut • The dynamic chisel-shaped and centring tip provides optimal guidance while drilling • Tungsten carbide tipped for longevity • Strengthened flute • Centering chisel head with multi-flute spiral for maximum drilling capacity • Easy centring spot drilling • Dynamic, chisel-shaped head design • Fully certified for drilling anchor holes Suits: SDS rotary hammer drills Ideal for: All masonry applications including concrete with rebar

Enquire about this product

Email Address
Message