Endmills - Carbide

HomeCategoriesEndmills-carbide4-fluteCarbide-tialn-4-flute

Search Products Search Products




Carbide TiALN | 4 Flute | 20.0mm

Carbide TiALN | 4 Flute | 20.0mm

$399.00 NZD
Approx $232.41 USD
Excl GST Product Code: 366 2000

  • Diameter: 20.0
  • Shank Diameter: 20
  • Length: 110
  • Flute Length: 50

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 18.0mm

Carbide TiALN | 4 Flute | 18.0mm

$349.00 NZD
Approx $203.29 USD
Excl GST Product Code: 366 1800

  • Diameter: 18.0
  • Shank Diameter: 18
  • Length: 100
  • Flute Length: 45

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 16.0mm

Carbide TiALN | 4 Flute | 16.0mm

$299.00 NZD
Approx $174.16 USD
Excl GST Product Code: 366 1600

  • Diameter: 16.0
  • Shank Diameter: 16
  • Length: 100
  • Flute Length: 40

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 14.0mm

Carbide TiALN | 4 Flute | 14.0mm

$249.00 NZD
Approx $145.04 USD
Excl GST Product Code: 366 1400

  • Diameter: 14.0
  • Shank Diameter: 14
  • Length: 80
  • Flute Length: 35

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 12.0mm

Carbide TiALN | 4 Flute | 12.0mm

$129.00 NZD
Approx $75.14 USD
Excl GST Product Code: 366 1200

  • Diameter: 12.0
  • Shank Diameter: 12
  • Length: 75
  • Flute Length: 30

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 10.0mm

Carbide TiALN | 4 Flute | 10.0mm

$104.00 NZD
Approx $60.58 USD
Excl GST Product Code: 366 1000

  • Diameter: 10.0
  • Shank Diameter: 10
  • Length: 75
  • Flute Length: 25

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 8.0mm

Carbide TiALN | 4 Flute | 8.0mm

$81.00 NZD
Approx $47.18 USD
Excl GST Product Code: 366 0800

  • Diameter: 8.0
  • Shank Diameter: 8
  • Length: 60
  • Flute Length: 20

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 6.0mm

Carbide TiALN | 4 Flute | 6.0mm

$39.00 NZD
Approx $22.72 USD
Excl GST Product Code: 366 0600

  • Diameter: 6.0
  • Shank Diameter: 6
  • Length: 50
  • Flute Length: 15

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 1.5mm

Carbide TiALN | 4 Flute | 1.5mm

$34.90 NZD
Approx $20.33 USD
Excl GST Product Code: 366 0150

  • Diameter: 1.5
  • Shank Diameter: 4
  • Length: 50
  • Flute Length: 4

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 2.5mm

Carbide TiALN | 4 Flute | 2.5mm

$34.90 NZD
Approx $20.33 USD
Excl GST Product Code: 366 0250

  • Diameter: 2.5
  • Shank Diameter: 4
  • Length: 50
  • Flute Length: 6

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 5.0mm

Carbide TiALN | 4 Flute | 5.0mm

$29.00 NZD
Approx $16.89 USD
Excl GST Product Code: 366 0500

  • Diameter: 5.0
  • Shank Diameter: 6
  • Length: 50
  • Flute Length: 13

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 5.5mm

Carbide TiALN | 4 Flute | 5.5mm

$27.69 NZD
Approx $16.13 USD
Excl GST Product Code: 366 0550

  • Diameter: 5.5
  • Shank Diameter: 6
  • Length: 50
  • Flute Length: 14

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 4.0mm

Carbide TiALN | 4 Flute | 4.0mm

$27.00 NZD
Approx $15.73 USD
Excl GST Product Code: 366 0400

  • Diameter: 4.0
  • Shank Diameter: 4
  • Length: 50
  • Flute Length: 10

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 3.0mm

Carbide TiALN | 4 Flute | 3.0mm

$18.98 NZD
Approx $11.06 USD
Excl GST Product Code: 366 0300

  • Diameter: 3.0
  • Shank Diameter: 4
  • Length: 50
  • Flute Length: 8

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 3.5mm

Carbide TiALN | 4 Flute | 3.5mm

$18.98 NZD
Approx $11.06 USD
Excl GST Product Code: 366 0350

  • Diameter: 3.5
  • Shank Diameter: 4
  • Length: 50
  • Flute Length: 9

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 4.5mm

Carbide TiALN | 4 Flute | 4.5mm

$18.98 NZD
Approx $11.06 USD
Excl GST Product Code: 366 0450

  • Diameter: 4.5
  • Shank Diameter: 6
  • Length: 50
  • Flute Length: 12

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 1.0mm

Carbide TiALN | 4 Flute | 1.0mm

$12.50 NZD
Approx $7.28 USD
Excl GST Product Code: 366 0100

  • Diameter: 1.0
  • Shank Diameter: 4
  • Length: 50
  • Flute Length: 3

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Carbide TiALN | 4 Flute | 2.0mm

Carbide TiALN | 4 Flute | 2.0mm

$12.50 NZD
Approx $7.28 USD
Excl GST Product Code: 366 0200

  • Diameter: 2.0
  • Shank Diameter: 4
  • Length: 50
  • Flute Length: 5

Description:

4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.

Enquire about this product

Email Address
Message