Ali Cut | 2 Flute | 16.0mm
$129.00 NZD
Approx $77.56 USD Excl GST Product Code: 368 1600
- Diameter: 16.0
- Shank Diameter: 16
- Length: 100
- Flute Length: 40
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 12.0mm
$89.00 NZD
Approx $53.51 USD Excl GST Product Code: 368 1200
- Diameter: 12.0
- Shank Diameter: 12
- Length: 75
- Flute Length: 30
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 10.0mm
$79.00 NZD
Approx $47.50 USD Excl GST Product Code: 368 1000
- Diameter: 10.0
- Shank Diameter: 10
- Length: 75
- Flute Length: 25
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 8.0mm
$59.00 NZD
Approx $35.48 USD Excl GST Product Code: 368 0800
- Diameter: 8.0
- Shank Diameter: 8
- Length: 60
- Flute Length: 20
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 6.0mm
$49.00 NZD
Approx $29.46 USD Excl GST Product Code: 368 0600
- Diameter: 6.0
- Shank Diameter: 6
- Length: 50
- Flute Length: 15
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 5.0mm
$44.00 NZD
Approx $26.46 USD Excl GST Product Code: 368 0500
- Diameter: 5.0
- Shank Diameter: 6
- Length: 50
- Flute Length: 13
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 4.0mm
$42.50 NZD
Approx $25.56 USD Excl GST Product Code: 368 0400
- Diameter: 4.0
- Shank Diameter: 4
- Length: 50
- Flute Length: 10
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 4.5mm
$42.50 NZD
Approx $25.56 USD Excl GST Product Code: 368 0450
- Diameter: 4.5
- Shank Diameter: 6
- Length: 50
- Flute Length: 12
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 2.5mm
$39.90 NZD
Approx $23.99 USD Excl GST Product Code: 368 0250
- Diameter: 2.5
- Shank Diameter: 4
- Length: 50
- Flute Length: 6
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 3.0mm
$39.90 NZD
Approx $23.99 USD Excl GST Product Code: 368 0300
- Diameter: 3.0
- Shank Diameter: 4
- Length: 50
- Flute Length: 8
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 3.5mm
$39.90 NZD
Approx $23.99 USD Excl GST Product Code: 368 0350
- Diameter: 3.5
- Shank Diameter: 4
- Length: 50
- Flute Length: 9
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 1.0mm
$34.77 NZD
Approx $20.90 USD Excl GST Product Code: 368 0100
- Diameter: 1.0
- Shank Diameter: 4
- Length: 50
- Flute Length: 3
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 1.5mm
$34.77 NZD
Approx $20.90 USD Excl GST Product Code: 368 0150
- Diameter: 1.5
- Shank Diameter: 4
- Length: 50
- Flute Length: 4
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 2.0mm
$34.77 NZD
Approx $20.90 USD Excl GST Product Code: 368 0200
- Diameter: 2.0
- Shank Diameter: 4
- Length: 50
- Flute Length: 5
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product