Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 3 Flute | 16.0mm
$170.00 NZD
Approx $96.16 USD Excl GST Product Code: 369 1600
- Diameter: 16.0
- Shank Diameter: 16
- Length: 100
- Flute Length: 40
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 2 Flute | 16.0mm
$129.00 NZD
Approx $72.97 USD Excl GST Product Code: 368 1600
- Diameter: 16.0
- Shank Diameter: 16
- Length: 100
- Flute Length: 40
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 14.0mm
$120.00 NZD
Approx $67.88 USD Excl GST Product Code: 369 1400
- Diameter: 14.0
- Shank Diameter: 14
- Length: 80
- Flute Length: 35
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 12.0mm
$89.00 NZD
Approx $50.34 USD Excl GST Product Code: 368 1200
- Diameter: 12.0
- Shank Diameter: 12
- Length: 75
- Flute Length: 30
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 12.0mm
$80.00 NZD
Approx $45.25 USD Excl GST Product Code: 369 1200
- Diameter: 12.0
- Shank Diameter: 12
- Length: 75
- Flute Length: 30
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 2 Flute | 10.0mm
$79.00 NZD
Approx $44.69 USD Excl GST Product Code: 368 1000
- Diameter: 10.0
- Shank Diameter: 10
- Length: 75
- Flute Length: 25
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 10.0mm
$60.00 NZD
Approx $33.94 USD Excl GST Product Code: 369 1000
- Diameter: 10.0
- Shank Diameter: 10
- Length: 75
- Flute Length: 25
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 2 Flute | 8.0mm
$59.00 NZD
Approx $33.37 USD Excl GST Product Code: 368 0800
- Diameter: 8.0
- Shank Diameter: 8
- Length: 60
- Flute Length: 20
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
HSS | 4 Flute | 20.0mm
$55.00 NZD
Approx $31.11 USD Excl GST Product Code: 360 2000
- Diameter: 20.0
- Shank Diameter: 20
- Length: 104
- Flute Length: 38
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 2 Flute | 6.0mm
$49.00 NZD
Approx $27.72 USD Excl GST Product Code: 368 0600
- Diameter: 6.0
- Shank Diameter: 6
- Length: 50
- Flute Length: 15
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 3 Flute | 8.0mm
$45.00 NZD
Approx $25.45 USD Excl GST Product Code: 369 0800
- Diameter: 8.0
- Shank Diameter: 8
- Length: 60
- Flute Length: 20
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
HSS | 4 Flute | 18.0mm
$45.00 NZD
Approx $25.45 USD Excl GST Product Code: 360 1800
- Diameter: 18.0
- Shank Diameter: 16
- Length: 92
- Flute Length: 32
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 2 Flute | 5.0mm
$44.00 NZD
Approx $24.89 USD Excl GST Product Code: 368 0500
- Diameter: 5.0
- Shank Diameter: 6
- Length: 50
- Flute Length: 13
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 4.0mm
$42.50 NZD
Approx $24.04 USD Excl GST Product Code: 368 0400
- Diameter: 4.0
- Shank Diameter: 4
- Length: 50
- Flute Length: 10
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Ali Cut | 2 Flute | 4.5mm
$42.50 NZD
Approx $24.04 USD Excl GST Product Code: 368 0450
- Diameter: 4.5
- Shank Diameter: 6
- Length: 50
- Flute Length: 12
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
HSS | 4 Flute | 16.0mm
$41.00 NZD
Approx $23.19 USD Excl GST Product Code: 360 1600
- Diameter: 16.0
- Shank Diameter: 16
- Length: 92
- Flute Length: 32
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 3 Flute | 7.0mm
$40.00 NZD
Approx $22.63 USD Excl GST Product Code: 369 0700
- Diameter: 7.0
- Shank Diameter: 8
- Length: 60
- Flute Length: 17
Description:
3 flutes allow for faster feed rates while machining Aluminium and non-ferrous materials. Our range of 3 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
Description:
4 flutes allow for faster feed rates while machining alloys such as steel. Our range of 4 flute endmills come in center-cut and ball nose, and are traditionally coated to prolong the life of the endmill.
Enquire about this product
Ali Cut | 2 Flute | 2.5mm
$39.90 NZD
Approx $22.57 USD Excl GST Product Code: 368 0250
- Diameter: 2.5
- Shank Diameter: 4
- Length: 50
- Flute Length: 6
Description:
Traditionally used for machining Aluminium and non-ferrous materials, our range of 2 flute endmills come in center-cut and ball nose, as well as coated or non coated.
Enquire about this product
